24kV 630AMP Deadbreak Shielded Fore-Connector

24kV 630A Deadbreak Shielded Fore-Connector is for the connection of polymeric cable to transformers, switchgear, motors and other equipment with a premoulded separable connector for indoor and outdoor installations. The system voltage up to 24kV and continuous current is 630A.

24kV 630A Deadbreak Shielded Fore-Connector is for the connection of polymeric cable to transformers, switchgear, motors and other equipment with a premoulded separable connector for indoor and outdoor installations. The system voltage up to 24kV and continuous current is 630A.

 

Performance

Shielded Fore-Connector provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug. It can be used under the circumstances. Built-in capacitive test point to determine the circuit status or install a fault indicator.No minimum phase clearance requirements. For mounting can be vertical, horizontal, or any angle in between.

 

Order Information

Reference No. Conductor Cross Section (mm²) Stretch Range Over Insulation(mm) Cable Type(kV) Corresponding Code
UG DSF-24/630-35 35 18.3-21.5 12/20(24) B
UG DSF-24/630-50 50 19.9-24.6 12/20(24) C
UG DSF-24/630-70 70 19.9-24.6 12/20(24) C
UG DSF-24/630-95 95 23.1-27.1 12/20(24) D
UG DSF-24/630-120 120 23.1-27.1 12/20(24) D
UG DSF-24/630-150 150 24.9-29.0 12/20(24) E
UG DSF-24/630-185 185 27.4-32.5 12/20(24) F
UG DSF-24/630-240 240 27.4-32.5 12/20(24) F
UG DSF-24/630-300 300 31.0-36.1 12/20(24) G
UG DSF-24/630-400 400 34.5-37.6 12/20(24) H

Any other special requirement, please contact our sales engineer. The adapter code should be confirmed while ordering.

 

Electrical Characteristics

Voltage Rating 24kV
Maximum Rating Phase-to-ground 12kV
AC 50Hz 5 Minute Withstand 54kV
DC 15 Minute Withstand 48kV
BIL Impulse Withstand Voltage 125kV
Partial Discharge Voltage 20kV (< 10pC)
Continuous Current 630A
24h Overload 1000A
Short Time 10kA rms sym. for 0.2s 35kA rms sym. for 3.0s
Meets IEC 60502-4, latest version. Mate with bushing Interface C.

Bom

– Fore-Connector

– Covering Cap

– Insulating Plug

– Adaptor – Conductor Cable Lug

– Threaded Stud

– Silicone Lubricant

– Installation Tool(Optional)

– Grounding Wire(Optional)

– Installation Instruction Sheet(Optional)

Reviews

There are no reviews yet.

Be the first to review “24kV 630AMP Deadbreak Shielded Fore-Connector”

Your email address will not be published. Required fields are marked *

Scroll to Top