Description
15kV 200A Loadbreak Elbow connector is a fully-shielded and insulated plug-in termination, rated 200A, 15kV, connected with underground cable ranging from 25mm² to 150 mm² (conductor cross section). It’s loadbreak probe with an ablative arc-follower tip provides dependable loadbreak switching characteristics. The Loadbreak Elbows are molded with high quality peroxide-cured EPDM insulation. It is used to connect underground cable to transformers, switchgear and 200A junctions equipped with loadbreak bushings. The test point is available with hot line voltage indicators.
Order Information
| Reference No. | Conductor Cross Section (mm²) | Stretch Range Over Insulation(mm) | Corresponding Code |
| UG LE-15/200-35 | 35 | 16.3-23.1 | A |
| UG LE-15/200-50 | 50 | 16.3-23.1 | A |
| UG LE-15/200-70 | 70 | 19.1-25.7 | B |
| UG LE-15/200-95 | 95 | 21.3-28.2 | C |
| UG LE-15/200-120 | 120 | 21.3-28.2 | C |
| UG LE-15/200-150 | 150 | 21.3-28.2 | C |
– The cable range is the basic element for choosing the product’s type.
– The conductor size is just for a reference.
Electrical Characteristics
| Voltage Rating | 15kV |
| Maximum Rating Phase-to-phase | 14.4kV |
| Maximum Rating Phase-to-ground | 8.3kV |
| AC 50Hz 1 Minute Withstand | 34kV |
| DC 15 Minute Withstand | 53kV |
| BIL and 1.5 / 50µs Impulse Withstand Voltage | 95kV |
| Partial Discharge Voltage | 11kV ( <3pC) |
| Continuous Current | 200A |
| Switching Current | 10 operations at 200A, 14.4kV |
| Fault Closure | 10kA |
| Short Time | 10kA rms sym. For 0.17s (60Hz) / 0.2s (50Hz) 3.5kA rms sym. for 3.0s |
| Meets ANSI / IEEE 386, latest version. Mate with bushing interface figure 5. | |
Bom
– Loadbreak Elbow Connector
– Test Point Cap
– Grounding Wire
– Loadbreak Probe
– Cleaning Tissue
– Silicone Lubricant
– Conductor Cable Lug
– Probe Installation Tool(Optional)
– Installation Instruction Sheet(Optional)
Reviews
There are no reviews yet.